OMRON Scientific Technologies, Inc.
6550 Dumbarton Circle
Fremont, CA 94555 USA
Toll Free: 888-510-4357   Tel: 510-608-3400   Fax: 510-744-1442
E-Mail: sales@sti.com    Web site: www.sti.com
All Categories > Two-Hand Control > TouchStart Capacitive Palm Button > Item # TS-10  


Item # TS-10, TouchStart Palm Button, Includes Mounting Jam Nut and Gasket, 120 VAC



Capacitive Palm Button
  • No physical pressure required to actuate switch—reduces the likelihood of wrist injury caused by repetitive motion.
  • Excellent sensitivity—sensor is designed to operate even if operator is wearing gloves.
  • RFI Immunity—special circuitry inhibits output in the presence of RFI that would otherwise cause false triggering of output.
  • AC version is UL Recognized—meets the applicable requirements in the proposed first edition of UL 491.
  • Saves time and money.
    – Easy mounting in a single hole.
    – Wiring is simplified because terminals are clearly identified and easily accessible.
    – No special power supplies are required because switch is available in either 120 VAC or 24 VDC versions.

Specifications are subject to change without notice

Click on a part number below to access the 3D/2D CAD Drawings.






Specifications

Shipping requirements
Normally in Stock US

Max Wiring Size
14 AWG (1)

Housing Material
Nory lN190

Weight
313 g
11 oz

Actuation
Hand sensitive requiring no pressure to initiate, operates with or without gloves

Power Supply
120 VAC ±10%, 45 to 60 Hz

Power Consumption
≤ 1 W

Indicator
Red LED, illuminates when relays are energized

Outputs
Two relays provide 1 set of normally open contacts, 1 set of normally closed contacts. Force-guided contacts are used.

Contact Ratings
1 A at 250 VAC max resistive; 1 A at 90 VDC max resistive

Mechanical Life
Greater than 50 million operations

Electrical Life
Greater than 5 million operations at loads less than 50 VA

Mechanical Shock
45 g for 2 ms

Vibration
4 g at f ≤ 60 Hz and amplitude ≤ 1 mm

Relative Humidity
≤ 99%

Noise Protection1
Bursts to 2 kV, spikes of 500V, electrostatic fields to 8 kV

Weldfield Immunity2
Resistor welding up to 50 kA AC/DC (in suitable enclosure)

RFI
≤ 8 V/m

Protection
IP64

Temperature Range
-18 to 50 ºC
0 to 122 ºF

Max Response Times
On = 60 ms; Off = 80 ms

Approvals
CE marked for all applicable directives, UL and C-UL
1 If any of these values are exceeded, the TouchStart will default to a safe state (output relays de-energized). The TouchStart automatically resets when conditions fall below the limit.
2 If any of these values are exceeded, the TouchStart will default to a safe state (output relays de-energized). The TouchStart automatically resets when conditions fall below the limit.



Print Back