Safety Edge Controllers On Omron Automation & Safety

Industrial Automation

OMRON Scientific Technologies, Inc.

Search Catalog



	All Categories Safety Edge Controllers


	Safety Edge Controllers
	Check up to five results to perform an action.

	Single Channel Safety Edge Controllers for use with All Safety Edges and Safety Bumpers Power requirements – 120 VAC or 24 VDC is acceptable for the SCC-1224 single channel units Inputs – Single channel units accept a single two-wire edge or bumper system Outputs – Single channel units have two safety outputs and one auxiliary output for signaling External Device Monitoring –EDM is provided on all units with a N/C loop between Z1 and Z2 Monitored Reset Modes – Monitored manual reset mode that requires closure of the reset circuit followed by opening of the circuit is available on all units – Automatic reset mode that occurs upon closure of the reset circuit is available on all units Delayed Auxiliary Output – Delayed opening of the auxiliary output for reversal of a door or gate may be selected on all units except SCC1224ND Specifications are subject to change without notice Click on a part number below to access the 3D/2D CAD Drawings.
	larger image	larger image

Results Per Page :

Item #

43872-0020

SCC-1224

Normally in Stock Canada
Normally in Stock US

Single-Channel Safety Edge Din-Mount Controller for use with all safety edges, 120 VAC or 24 VDC

< 13 ms

115 VAC, 50/60 Hz, 3 VA or 24 VAC/DC ± 10%, 1.5 W

2 N/O Relay

Activates after approx. 1 s for approx. 3 s if the sensing device is actuated or faulty

43872-0021

SCC-1224ND

Normally in Stock Canada
Normally in Stock US

Single-Channel Safety Edge Din-Mount Controller for use with all safety edges, 120 VAC or 24 VDC;

< 13 ms

115 VAC, 50/60 Hz, 3 VA or 24 VAC/DC ± 10%, 1.5 W

2 N/O Relay

Activates if the sensing device is actuated or if a sensing device fault is detected